TIG250ACDCGD TIG ACDCWELDING MACHINE

Introduction: Working voltage single-phase 115V / 230V or three-phase 380V, IGBT inverter, output current range 5-250A, output current 250A temporary load rate 40%; TIG has 2T / 4T, pulse welding, AC / DC, slow rise / Slow down, foot switch remote control and other functions, suitable for φ1.6 ~ 3.2mm tungsten needle, AC welding thickness 1-5mm, DC welding thickness 0.5-7.5mm, can weld non-ferrous metals such as aluminum, magnesium and aluminum alloy; MMA is applicable Welding electrode φ1.6-5.0mm (acid electrode, alkaline electrode), welding thickness 1.5-10mm, can weld carbon steel, stainless steel and other metals; suitable for hardware, decoration, aluminum products processing and maintenance operations.

Advantages: novel appearance, digital panel design, high-end grade, precise parameter adjustment; TIG / MMA dual-use, perfectperformance, high-frequency arc starting for argon arc welding, easy arc starting, DC minimum welding current can be as low as 5A, very suitable For thin plate welding, the AC frequency and pulse frequency can be up to 200HZ; the foot switch is connected to the welding machine, and it is automatically detected and converted into the remote control mode, which is easy to operate; the manual welding has a built-in hot arc starting, easy arc starting, soft arc and little spatter ; 115V / 230V will automatically switch, with over-current, over-heat protection function to ensure the safety and reliability of the welding machine.

Accessories:TIG torch,ground clamp,electrode holder,gas hose,mask,hammer brush