Serial No. : SRS-AL004
Size(mm):125*105*25
Material:Al frame+Mix epoxy filler
Color:SILIVER
Support level: A
Registered capital:200
Founded:2010
Number of companies:1-50人
Export scale:
Contact: 曹**
E-Mail:Sign In
Tel:Sign In
●SUPER DURABLE:
1.Using the aluminum material to make frame which has better intensity.
2.The mixed epoxy filler(Optional) makes the compression resistance degree be over 30t.
3.The embedded reflectors design can reduce abrasion.
●HIGH BRIGHT:
1.Our road stud using the great acrylic reflector,its reflection is stronger than other materials.
2.Our road stud uses great acrylic reflectors which have better reflection.
3.We use the bright LED bulb which is provided by Taiwan well-known brand. It has long using lifespan that is more than 100000 hours.
●EXTERNAL MAGNET SWITCH(OPTIONAL):Special design of the internal circuit to make MAGA to be turned ON/OFF by an external mini-Magnet, good for long time storing.
●WATERPROOF:Reach to IP68 waterproof level.
●CUSTOM(OPTIONAL):①Synchronous flash road stud, which is also called co-frequency road stud.
②Sequential flash road stud.
●COLOR OPTIONAL:red/yellow/white/green/blue
①Synchronous flash
②Sequential flash
●CUSTOM OPTIONAL:Synchronous flash/Sequential flash
●Fixed screw holes.
●Load-bearing more than 30T.
●Long life.
●Solar panels 3V/90mA, 1.2v 1200mA NI-MH battery.
●Protect Level: IP68.
●Anti-corrosive sealed coating.
●Super charge rate, absorb solar energy even in dim light
●Sand-blasted and curve smooth of edges can better buffer tire's compression.
●Visual Distance: > 1000 meter in dark.
●High quality reflector meets Euro reflective road stud standard.
●Work mode:flashing/steady
●Lighting Time:200h after fully charged in flashing mode.
●Anti-corrosion.
●Sealed waterproof design. Totally waterproof IP68.
●Interlock system.
●8 screws.
●Load-bearing more than 30T.
●Cambered surface design. Dispersing weight pressure.
●Special design of the internal circuit to make MAGA to be turned ON/OFF by an external mini-Magnet, good for long time storing.
Installation:
Before installation: Placing security isolation facilities for installation work is most important and must not be ignored.
1.Locate the installing position and ensure it is flat. For curving, cracked or uneven pavement, straighten it prior to installation.
2.Clean the installation location with a brush, meanwhile ensure the location is dry.
3.Firmly mount the stud on the fixing location & ensure the reflective part is facing the right traffic direction.Glue the road stud thoroughly with proper amount of epoxy glue.
4.Inspect the installed studs within 2 hours after installation, ensuring that all the studs are fixed in correct direction or not crooked.
5.Remove the isolation facilities in 4 hours after the stud's installing glue is thoroughly cured.
●Make road line and the guardrail clearly. Use in rural roads or special regional road (Like swimming pool ,bridge etc).
●Public outdoor spaces like street, parking lot, park, lawn, squares.