Motor Rotor and Stator Recycling Equipment QD-2000

 Considerable scrap motor rotors are generated everyday in the world which seriously threaten our living environment. 

QD-2000 motor stator and rotor recycling equipment is made for processing such scraps to recycle high-purity metals. 

It not only develops the national economy and protects the environment, but also is conducive to the development of the recycling industry.

1.Product descriptions：

QD-2000 Motor Rotor Recycling Machine processes waste rotor with no pollution.

Using dry crusher, strong magnetic roller separator and air separator, the waste rotor is crushed and sorted by QD-2000.

Obviously compared with manual dismantling which is difficult and requires high labor cost, 

it will be much easier to operate to obtain renewable resources when processed by this professional equipment.

2.Technical parameters：

Separation rate :                           up to 97% 高达97%

Overall dimension(LxWxH):        1700*500*500cm

Machine weight:                          13000kg

Motor voltage:                             380V/220V (can be customized);

Output/hour:                                1200-2000kgs

Motor Power:                               180KW

1) Well-known copper wire granulators in China!

2) Convenient for installation, testing and transportation due to its overall combined structure;

     Technicians can be sent abroad for door-to-door service if necessary.

3) Fully automatic operations by PLC system, reducing labor costs and increasing efficiency;

4) Up to 97% separation of metals from plastics and no dust or secondary pollution;

5) Good economic benefits, that’s recycled copper, aluminum and plastics can sell at a high price for its high purity;

6)  Excellent performance especially with rubber wires, miscellaneous wires, and large-size cables;

7) No major quality problems with the equipment after being used for even 6 years;

4.Recycling process：

The whole process is carried out in negative pressure.Before feeding the materials, 

hard materials like large iron blocks,big-size screws and shafts need to be taken out in advance. 

The remainings enter the primary crusher first, then the second crusher to get the small-size mixtures.

 At last,iron and copper will be separated by strongly magnetic roller separator and air separator. 

And the dust emission can be efficiently solved by the pulse dust removal system.