Servo motor drive

Product Description

JLS300 Series Servo Drive

Standard Features：

1.Smaller volume and higher power density;

2.Wide voltage design, it can work in the rated input voltage range of -15%~10%;

3.All the power below 90KW are equipped with built-in brake units, and have protection functions such as brake circuit, short circuit, over current, overload, and straight through of brake pipe;

4.Long life design, using high configuration of bus capacitance, to ensure longer life of drive;

5.Better EMC configuration scheme;

6.Fan drive circuit protection, when short circuit and locked-rotor in fan, it will not affect the power supply of other circuits.

Technical Specifications：

Items		Specifications
Basic functions	The highest frequency	0~300Hz
	The carrier frequency	0.5~8KHz, which can be automatically adjusted according to the load characteristics
	Input frequency resolution	digital input: 0.01Hz analog input: highest frequency ×0.1%
	Control mode	closed-loop vector FVC, V/F control
	Starting torque	FVC 0Hz/180%
	Speed adjustment range	1:1000 FVC
	Speed stabilization precision	±0.02% FVC
	Torque control precision	±5% FVC
	Overload capacity	150%Ie 60s 180%Ie 3s
	Inching control	Frequency is 0.00~50.00Hz, and the acceleration and deceleration time is 0.0~6500.0s
	Simple PLC and multi-speed operation	Through the built-in PLC or DI terminal can achieve a maximum of 16-segment speed operation
	The built-in PID process control	Easy to realize the process closed-loop control
	Automatic voltage adjustment (AVR)	Can automatically keep the production voltage constant when the input voltage changes
	Communication mode	Modbus-RTU和CAN_open
Protection function	Protection function	Short-circuit detection of power on motor, phase loss detection of input and output, overcurrent and overvoltage protection, undervoltage protection, overheat protection, overload protection, motor temperature protection, etc.

JLS600 Series Servo Drive

Technical Specifications：

Items	Specifications
Input voltage and frequency	Three phase AC（0.8~1.1）×220V frequency: 50/60Hz
Speed ratio	5000:1
Speed fluctuation ratio	＜Rated speed×0.01%
Speed frequency response	≥300Hz
Working mode	Inching, manual, internal speed, external speed and position
Internal speed mode	Operates by closed-loop control of 3-segment internal speed selected by the input signal, and the speed value can be set
External speed mode	Operates in closed-loop at the speed specified by the external analog voltage signal instruction
External speed instruction mode	DC:-10v~+10v or 0~10v, through parameter selection
The position mode	Operates by the closed-loop position control according to the given position command pulse. The direction and quantity of the position command pulse determine the running direction and angle of the servo motor, while the frequency of the position command pulse determines the running speed of the servo motor
Position command pulse mode	Pulse/direction, CCW/CW pulse, A/B two-phase orthogonal pulse three modes; Maximum pulse frequency: 1MHz
Position command electronic gear	Command pulse frequency doubling coefficient: 1~32767; Command pulse frequency division coefficient: 1~32767
Positioning accuracy	±0.005°(17bit absolute encoder); ±0.018°(5000 line incremental encoder)
Motor feedback input	Incremental encoder and absolute encoder of Tamagawa and Biss communication protocols
Position feedback output	Motor feedback input direct output or motor feedback input frequency division output
Communication bus	CAN_open Modbus-RTU
Input signal	Servo enabling, alarm clearance, CCW disable, CW disable, CCW start, CW start, zero speed clamping, internal speed 1/2 selection 9 input points
Output signal	Servo ready, servo alarm, position arrival/speed arrival, lock release, zero speed output, Z pulse (encoder zero) output 6 output points
Protection function	include overvoltage, undervoltage, overcurrent, overload, overheating of the drive, overspeed, position out of tolerance, abnormal braking, abnormal encoder, motor overheating, etc.
Operation and display	5 keys, can be manual, inching, as well as parameter modification, setting, writing, backup and other operations; The 6-bit LED display can display information such as speed, current position, command pulse accumulation, position deviation, motor torque, motor current, rotor absolute position, input and output signal status, etc.

Please download the PDF file to view the technical data, mounting, and outiline dimensions for different sizes.

JLS伺服驱动器.pdf

Product exhibition plan

Zhejiang Jinlong Electrical Machinery Stock Co.,Ltd